IMP DRIVER TC20030 WITH MULTICUT DRILL SET ALP PM3
Features
- 20V TC20030 impact driver Cordless impact driver platform designed for drilling and screwdriving in a range of common materials.
- Alpen Multicut PM3 drill set Multi-material drill bits engineered to cut in wood, metal, masonry, tiles and plastics.
- Variable speed trigger Electronic speed control allows gentle starts and better control when drilling or driving.
- Keyless chuck Quick, tool-free bit changes so you can swap between Multicut drills and driver bits in seconds.
- Compact, ergonomic design Comfortable soft-grip handle and balanced body for easier work overhead, on ladders and in tight spaces.
- 20V lithium-ion platform Designed to run on Tork Craft’s 20V cordless system for consistent power and quick recharging.
Benefits
- Multi-material capability: Drill into wood, masonry, mild steel and plastics using the same Multicut PM3 bit set.
- Fewer bit changes: One multi-purpose bit range means less swapping between different drill types as you move between surfaces.
- Cordless freedom: Work wherever the job is without trailing leads or hunting for plug points.
- Ideal for installation work: Perfect for fitting brackets, shelves, trunking, conduit, fixtures and fittings in mixed construction.
- Good value combo: Impact driver and Alpen Multicut drill set supplied together as a ready-to-work package.
Extra Information
- The Alpen Multicut PM3 bits are designed to handle most common building materials when used at the correct speed and feed.
- Use lower speeds for harder materials such as masonry and tiles, and higher speeds for timber and plastics.
- Ideal for trades that frequently work on mixed surfaces, such as electricians, shopfitters, security installers and maintenance teams.
- Keeping the Multicut set with the driver helps ensure you always have a suitable bit available for unexpected materials.
Pro Tip
- When moving between different materials on the same job, start by drilling at a slower speed until you feel the Multicut bit establish a clean track. Once the bit is stable, you can increase speed slightly to finish the hole. This reduces wandering on tiles and metal and gives a neater hole in brittle surfaces.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TORKIT041 |
| Product Type | Cordless impact driver and multi-material drill set combo |
| Impact Driver Model | TC20030 |
| Rated Voltage | 20V cordless platform |
| Chuck Type | Keyless chuck |
| Drill Bit Set Included | Alpen Multicut PM3 drill set |
| Bit Application | Multi-material drilling (wood, metal, masonry and plastics) |
| Typical Applications | General drilling and screwdriving for DIY, installation and maintenance work |
Safety
- Wear eye protection when drilling or driving screws to protect against chips and dust from different materials.
- Use a dust mask when drilling masonry, tiles or concrete and ensure the work area is well ventilated.
- Clamp or support workpieces securely so they cannot move or spin if the bit snags.
- Match speed and pressure to the material – do not force the bit; let it cut at its own pace.
- Remove the battery before changing bits, adjusting settings or performing any maintenance on the tool.
