SLEEVE LOCK HIGH STRENGTH FOR LARGE DIAMETER CYLINDRICAL PARTS - GREEN

Features

• High-strength anaerobic adhesive formula creates a rigid permanent bond between metal cylindrical parts.
• Suitable for large-diameter shafts, sleeves, bearings and housings — ideal when press-fit tolerances are marginal or need reinforcement.
• Compatible with steel, cast iron and common ferrous metals — works reliably in heavy-duty mechanical assemblies.
• Seals against vibration and micro-movement to prevent loosening, galling or fretting under load and rotation.
• Medium-viscosity for good capillary action — ensures even distribution in tight fits and gaps before curing.
• Green-coded for easy identification among maintenance adhesives and sealants.

Benefits

• Permanent, maintenance-free joints: once cured, parts stay locked in place — ideal for gearboxes, motor shafts and structural assemblies.
• Reduced risk of loosening under vibration or rotational stress: secure fit even in demanding industrial or workshop conditions.
• Prevents shaft slippage and misalignment: improves reliability and lifespan of mechanical assemblies and reduces downtime.
• Eliminates need for press-fit tolerances or welding: simplifies assembly and maintenance of shafts, bearings or housings.
• Cost-effective alternative to mechanical locking solutions: avoids need for special collars, locknuts or welding on many repair jobs.

Extra Information

• Ensure all metal surfaces are clean, dry and free of oil, grease or rust before application for proper curing and bond strength.
• Apply a thin, even layer of adhesive to the shaft or housing before assembly — avoid excess that can squeeze out into bearings or lubricant passages.
• After assembly, allow parts to cure undisturbed — handle lightly after approx. 30–60 minutes; full cure and full strength in around 24 hours depending on fit tolerance.
• Once cured, the bond is considered permanent — disassembly may require heat, mechanical force or solvent depending on joint design.
• Not suitable for non-metal materials such as plastics, rubber or wood — only for metal-to-metal cylindrical fits.

Specifications

Safety

• Use in a well-ventilated area; avoid inhaling vapours.
• Wear nitrile gloves when applying adhesive; avoid contact with skin and eyes. In case of contact, rinse thoroughly with water.
• Keep away from heat, sparks, open flame or sources of ignition; store sealed in a cool, dry place.
• Do not use on wet, oiled or dirty metal surfaces — ensure parts are clean and degreased before application.
• Keep out of reach of children; dispose of empty containers in accordance with local hazardous-waste regulations.