1
/
of
1
Vermont
BLADE TCT 300 X 40T 30/1/20 ATB POSITIVE PROFESIONAL INDUSTRIAL
BLADE TCT 300 X 40T 30/1/20 ATB POSITIVE PROFESIONAL INDUSTRIAL
Available in Store
Available from Supplier
Sold Out
Regular price
R 1,214.00 ZAR
Regular price
Sale price
R 1,214.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
BLADE TCT 300 X 40T 30/1/20 ATB POSITIVE PROFESIONAL INDUSTRIAL
Features
- 300 mm TCT circular saw blade — extra large diameter for deeper cuts, wide board passes and long sheet runs.
- 40 ATB positive teeth — decent tooth count for a large blade, tuned for general purpose timber, sheet goods and board work while retaining speed.
- 30/1/20mm bore configuration — fits saws with 30 mm arbor and reducing ring for 20 mm (and a special 1 mm variant) for broader compatibility.
- Tungsten-carbide tipped teeth — built for durability and consistent performance through broad timber and panel applications.
Benefits
- Large format cutting capability: The 300 mm diameter means you can handle very wide boards, full sheet formats and thick timber in one pass — great for production or site work.
- Balanced finish and feed: The 40-tooth ATB configuration gives better edge finish than coarse ripping blades, yet still enables strong feed rates on large stock.
- Flexible saw compatibility: The multi-bore setup means one blade can mount on different arbor sizes, reducing need for multiple blade types.
- Job-site and workshop durability: Industrial build quality ensures stable blade behaviour, less vibration and consistent cuts day after day under heavier workload.
Extra Information
- Best for wide board stock, thick sheet goods (plywood, MDF, laminates), structural timber and long length cuts where dimension and throughput matter.
- Fits large portable circular saws, table saws or mitre saw machines that accept the 300 mm diameter and the correct arbor size via reducing ring.
- If ultra-fine finish on delicate veneer faces or high-gloss panels is your exclusive task, you may still consider a higher-tooth-count blade (60-80T+) even with the large diameter.
- Keep the blade free of resin, adhesive, glue or board dust build-up — especially when cutting wide sheet materials — to maintain cut quality, reduce heat build-up and extend the life of the carbide tips.
Pro Tip
- When processing large sheet panels or long board stock with this 300 mm blade, support the off-cut side fully, use a straight-edge guide or track, and feed at a steady, controlled rate. This ensures you maximise the capacity of the 300 mm diameter blade and maintain a clean edge with minimal deflection.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCPR30040 |
| Product Type | TCT circular saw blade — large format timber & board cutting |
| Diameter | 300 mm |
| Tooth Count | 40T |
| Bore Size | 30 mm (with reducing rings for 20 mm & 1 mm) |
| Tooth Configuration | ATB (Alternate Top Bevel), positive hook |
Safety
- Wear appropriate eye, ear and dust protection when cutting.
- Disconnect the saw from power before fitting, adjusting or removing the blade.
- Ensure the blade is securely mounted, runs true and is rated for both the saw’s diameter and maximum RPM.
- Use guards, fences and supports; keep hands and body clear of the blade’s cutting path.
- Allow the blade to reach full speed before entering the cut and wait for it to stop entirely before setting the tool down.