1
/
of
1
Vermont
BLADE TCT 235 X 40T 30/25/16 ATB POSITIVE PROFESIONAL INDUSTRIAL
BLADE TCT 235 X 40T 30/25/16 ATB POSITIVE PROFESIONAL INDUSTRIAL
Available in Store
Available from Supplier
Sold Out
Regular price
R 718.00 ZAR
Regular price
Sale price
R 718.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
BLADE TCT 235 X 40T 30/25/16 ATB POSITIVE PROFESIONAL INDUSTRIAL
Features
- 235 mm TCT circular saw blade – larger diameter gives deeper cutting and longer passes through wide boards and sheets.
- 40 ATB positive teeth – optimized for general purpose and board cutting applications with smoother edge finish than coarse-tooth ripping blades.
- 30/25/16 mm bore configuration – Multi-arbor compatibility for saws with different arbor sizes, making blade stock more versatile.
- Tungsten-carbide tipped teeth – for extended blade life, stability and consistent cut quality through timber and board materials.
Benefits
- Greater cutting capacity: The 235 mm diameter allows you to handle wider boards, larger sheets and deeper cuts in framing or panel work.
- Better finish than standard rip blades: The 40-tooth ATB design delivers cleaner edges on plywood, laminated boards and hardwoods compared to lower-tooth options.
- Single-blade flexibility: With the multi-bore sizing you can mount this on multiple saws without needing separate blade sizes—saving time and blade inventory.
- Built for tough conditions: As part of the industrial line, the blade is designed for heavy-use and repeat cuts in workshop or site conditions.
Extra Information
- Recommended for cutting wide boards, sheet goods (plywood, MDF, laminates), cladding panels and structural timber where both capacity and cut quality matter.
- Fits large portable circular saws or table saws with 235 mm blade capacity and matching arbor sizes via reducing rings.
- If you are doing ultra-fine finishing on veneer-faced panels or delicate melamine face work, consider a higher tooth-count blade (60+ teeth) for even cleaner edges.
- Maintain the blade by clearing resin and glue build-up—especially when cutting laminated boards—to preserve finish quality and extend the life of the carbide tips.
Pro Tip
- When cutting large panels or wide boards, support the off-cut side fully and use a straight-edge guide or fence to ensure the 235 mm blade feeds steadily and cleanly across the width. A consistent, moderate feed-rate will help you get the cleaner edge finish this blade’s 40-tooth design is capable of.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCPR23540 |
| Product Type | TCT circular saw blade — general timber & board cutting |
| Diameter | 235 mm |
| Tooth Count | 40T |
| Bore Size | 30 mm (with reducing rings for 25 mm & 16 mm) |
| Tooth Configuration | ATB (Alternate Top Bevel), positive hook |
Safety
- Wear appropriate eye, ear and dust protection when cutting.
- Disconnect the saw from power before fitting, adjusting or removing the blade.
- Ensure the blade is mounted securely, runs true and is rated for the saw’s maximum diameter and RPM.
- Always use saw guards, fences and guides; keep hands clear of the cutting path.
- Allow the blade to reach full speed before entering the cut and wait until the blade has stopped completely before setting the tool down.