1
/
of
1
Vermont
BLADE CONTACTOR ALUM 210 X 60T 30/16 CIRCULAR SAW TCT
BLADE CONTACTOR ALUM 210 X 60T 30/16 CIRCULAR SAW TCT
Available in Store
Available from Supplier
Sold Out
Regular price
R 262.00 ZAR
Regular price
Sale price
R 262.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
BLADE CONTACTOR ALUM 210 X 60T 30/16 CIRCULAR SAW TCT
Features
- 210 mm diameter blade Provides greater cutting depth and reach across sheet and profile material while maintaining portability.
- 60 T carbide-tipped teeth High tooth count for fine, clean cuts with minimal burr and edge finish improvements.
- 30/16 mm bore configuration Main 30 mm bore with optional 16 mm reducing bush allows compatibility across saws with either arbor size.
- Contractor Series build quality Built for frequent use, demanding materials and trade conditions — dependable performance, no compromise.
- Aluminium-specific cutting geometry Designed explicitly for non-ferrous metals rather than standard timber, giving superior results where finish matters.
Benefits
- Cleaner, smoother edges: The combination of 60 teeth and optimised geometry gives you reduced finishing work and better visible edge quality.
- Trade-ready durability: With Contractor Series construction you get consistent performance and less downtime for blade changes.
- Flexible fitment across saws: The 30/16 mm bore arrangement gives you the flexibility to use the blade in different saws without needing multiple variants.
- Efficiency and finish in one: High initial cut quality means fewer follow-up operations, boosting productivity in shop or site environments.
Extra Information
- Ideal for aluminium joiners, metal trim installers, fabrication professionals, shop-fitters and site crews working in non-ferrous materials.
- Recommended for aluminium sheets, extrusions, light metal framing, non-ferrous profiles — not primarily for hardwood timber cutting.
- Ensure your circular saw is rated for 210 mm diameter blades and that the arbor/bore size matches either 30 mm or 16 mm before installation.
- To extend blade life: remove metal swarf and oxide build-up after each use, use appropriate coolants or dry-cut practices for aluminium, verify your saw’s base plate and fence are correctly aligned, and store the blade in a clean, dry environment when not in use.
Pro Tip
- When cutting aluminium sheet or profiles, clamp the work securely, consider using a sacrificial backing board beneath the cut-through area to support the edge, and feed at a constant, controlled pace. This Contractor Series 60-tooth blade will give crisp, clean edges and minimise the need for edge de-burring or finishing.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCP21060AL |
| Product Type | Contractor Series TCT circular saw blade for aluminium |
| Blade Diameter | 210 mm |
| Number of Teeth | 60 T (tungsten carbide-tipped) |
| Bore Size | 30 mm (with optional 16 mm reducing bush) |
| Recommended Materials | Aluminium sheet, extrusions, light non-ferrous metals |
| Typical Applications | Aluminium joinery, light-metal framing, trim work, fabrication |
Safety
- Wear eye, ear and metal-chip/oxide-dust protection when cutting aluminium to protect against flying chips, oxide particles and noise.
- Disconnect the saw from the power source before fitting or removing the blade.
- Ensure the blade is mounted correctly: check that the rotation arrow on the blade aligns with the saw’s direction of travel, and that all flanges, guards and adapters are securely in place.
- Maintain proper chip extraction or airflow when cutting aluminium—metal swarf and oxide can build up quickly and become hazardous.
- Allow the blade to reach full speed before starting the cut and wait until it has fully stopped before setting the saw down or changing the blade.