1
/
of
0
Vermont
CORD SET COMPL. (47-49/57) FOR TCCS0185
CORD SET COMPL. (47-49/57) FOR TCCS0185
Available in Store
Available from Supplier
Sold Out
Regular price
R 227.00 ZAR
Regular price
Sale price
R 227.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
CORD SET COMPL. (47-49/57) FOR TCCS0185
Features
- Complete cord-set replacement: Replaces the power cord and related cord-set components used in the TCCS0185 assembly.
- Parts reference match: Covers parts 47–49 and 57 as per the service diagram references.
- Improves cable retention: Restores correct support to reduce internal wire fatigue and terminal stress.
- Model-specific compatibility: Intended for use with the Tork Craft TCCS0185 cut-off saw.
Benefits
- Safer operation: Replacing damaged cords reduces the risk of electric shock, short circuits and overheating.
- Fix intermittent power issues: Fresh wiring and proper support helps prevent cutting out when the cord is moved.
- Longer-lasting repair: Correct strain relief and secure connections help prevent repeat failures.
Extra Information
- Compatibility: Intended for the Tork Craft TCCS0185 cut-off saw series.
- If the saw trips a breaker, shocks, or smells of burning insulation, stop using it immediately and have it inspected by a qualified technician.
- During replacement, inspect the switch terminals and internal wiring for heat damage or looseness.
- Ensure the cord is routed correctly and secured so it cannot chafe against moving parts or sharp edges.
Pro Tip
- Before closing the housing, gently pull the cord from the outside while watching the internal connections — there should be no movement at the terminals. Finish with a short no-load test and confirm stable power before cutting.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCCS0185-SK11 |
| Product Type | Spare Part Service Kit |
| Component Group | Cord Set Complete |
| Parts Reference | 47–49 & 57 |
| Compatible Tool Model | TCCS0185 |
Safety
- Wear eye protection and a dust mask when opening housings and cleaning internal dust.
- Disconnect power before opening the tool or fitting any electrical spare parts.
- Damaged cords are a shock hazard — never tape over severe insulation damage; replace correctly.
- Electrical repairs should be completed by a competent technician; incorrect wiring can cause electric shock or fire.
- After repair, perform a brief no-load test in a safe area and stop immediately if you smell burning, see arcing or the tool behaves erratically.