1
/
of
1
Vermont
SOFT START SWITCH SET (53/55) SERVICE KIT
SOFT START SWITCH SET (53/55) SERVICE KIT
Available in Store
Available from Supplier
Sold Out
Regular price
R 280.00 ZAR
Regular price
Sale price
R 280.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share

SOFT START SWITCH SET (53/55) SERVICE KIT
Features
- Soft start control repair: Replaces the soft start switch component group used in the TCAG0230 assembly.
- Parts reference match: Covers parts 53 and 55 as per the service diagram reference.
- Improves switching consistency: Helps restore predictable on/off behaviour and controlled start-up.
- Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.
Benefits
- Better start-up control: Smoother ramp-up reduces sudden torque reaction in your hands.
- Reduced mechanical stress: Gentler starts can reduce shock loading on gears, bearings and the drivetrain.
- More reliable operation: Fresh switching components can resolve intermittent cut-outs and inconsistent running.
Extra Information
- Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
- Common symptoms of soft start/switch issues include hard start-up jolts, intermittent running, or the tool not switching on reliably.
- While servicing, inspect the power cord, terminals, brush holders and carbon brushes — electrical faults often have more than one cause.
- Route wiring exactly as original and ensure insulation sleeves/cable guides are refitted to prevent chafing.
Pro Tip
- Before closing the housing, double-check every terminal connection is seated firmly and no wires can touch rotating parts. After reassembly, do a short no-load test run and confirm the grinder ramps up smoothly instead of jolting to full speed.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAG0230-SK13 |
| Product Type | Spare Part Service Kit |
| Component Group | Soft Start Switch Set |
| Parts Reference | 53 & 55 |
| Compatible Tool Model | TCAG0230 |
Safety
- Wear eye protection and a dust mask when working with internal debris and carbon dust.
- Disconnect power before opening the tool or fitting any electrical spare parts.
- Electrical repairs should be done by a competent technician — incorrect wiring can cause electric shock or fire.
- After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
- Perform a no-load test run in a safe area and stop immediately if you smell burning, see heavy arcing, or the tool behaves erratically.