1
/
of
1
Vermont
GRIND GUARD WITH SCREWS (3-5) SERVICE KIT
GRIND GUARD WITH SCREWS (3-5) SERVICE KIT
Available in Store
Available from Supplier
Sold Out
Regular price
R 98.00 ZAR
Regular price
Sale price
R 98.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
GRIND GUARD WITH SCREWS (3-5) SERVICE KIT
Features
- Grind guard replacement kit: Restores the grinder’s protective guard assembly for proper coverage.
- Includes mounting screws: Supplied with the required fasteners for a correct, secure fit.
- Parts reference match: Covers parts 3–5 as per the service diagram reference.
- Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.
Benefits
- Improved safety: Helps reduce exposure to sparks, swarf and debris while working.
- Better control and visibility: Correct guard positioning improves workflow and protects surrounding surfaces.
- Compliance and peace of mind: A properly fitted guard keeps the tool closer to intended safety standards.
Extra Information
- Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
- Always orient the guard so sparks are deflected away from the operator and bystanders.
- If the guard won’t clamp/seat correctly, inspect the guard collar area and gearbox nose for damage or burrs before forcing fitment.
Pro Tip
- After fitting the guard, tighten the screws evenly and re-check tightness after the first few minutes of use. A guard that “walks” out of position usually means the seating surface is dirty or the clamp is not aligned correctly.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAG0230-SK02 |
| Product Type | Spare Part Service Kit |
| Component Group | Grind Guard With Screws |
| Parts Reference | 3–5 |
| Compatible Tool Model | TCAG0230 |
Safety
- Wear eye, ear and dust protection when operating an angle grinder.
- Disconnect power before fitting any spare parts or adjusting the guard.
- Never operate the grinder without a correctly fitted guard.
- Use only rated discs suitable for the job and never exceed the disc’s maximum RPM.
- After installation, perform a brief no-load test and confirm the guard is secure and not contacting the disc.