1
/
of
1
Vermont
HOUSING KIT COMPL. (37/38/45/50/56/57) SERVICE KIT
HOUSING KIT COMPL. (37/38/45/50/56/57) SERVICE KIT
Available in Store
Available from Supplier
Sold Out
Regular price
R 139.00 ZAR
Regular price
Sale price
R 139.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share

HOUSING KIT COMPL. (37/38/45/50/56/57) SERVICE KIT
Features
- Housing repair kit: Replaces the key outer housing components used in the TCAG0115 assembly.
- Parts reference match: Covers parts 37, 38, 45, 50, 56 and 57 as per the service diagram references.
- Restores secure fitment: Helps correct loose closures, broken screw posts, and misalignment caused by damaged housings.
- Model-specific compatibility: Intended for use with the Tork Craft TCAG0115 angle grinder.
Benefits
- Safer handling: A solid housing helps you maintain control and reduces the risk of exposed wiring or loose components.
- Cleaner, more reliable rebuild: Fresh housings improve component seating and reduce vibration from movement inside the tool.
- Extend tool life: Replacing damaged casings protects motor parts and wiring from dust, knocks and strain.
Extra Information
- Compatibility: Intended for the Tork Craft TCAG0115 angle grinder series.
- During installation, confirm that wiring is routed correctly and not pinched between housing halves.
- If screws no longer hold firmly, inspect screw threads and matching inserts/posts—use the correct fasteners and avoid over-tightening.
- Best practice: Inspect the cord entry/strain relief area and switch seating while the housing is open.
Pro Tip
- Before closing the new housing, do a quick “dry fit”: place the switch and wiring in position and check that nothing sits proud. Tighten screws evenly (alternate sides) to avoid twisting the housing, then do a short no-load test run to confirm everything feels solid and normal.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAG0115-SK11 |
| Product Type | Spare Part Service Kit |
| Component Group | Housing Kit Complete |
| Parts Reference | 37, 38, 45, 50, 56 & 57 |
| Compatible Tool Model | TCAG0115 |
Safety
- Wear eye, ear and dust protection when operating an angle grinder.
- Disconnect power before opening the tool or fitting any spare parts.
- Ensure all internal wiring is correctly routed and insulated—pinched wires can cause electric shock or failure.
- After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
- Perform a no-load test run in a safe area after the repair and stop immediately if you smell burning, hear rubbing, or feel excessive vibration.