1
/
of
1
Vermont
GEAR & SPINDLE COMPL. (6-14/16/23) SERVICE KIT
GEAR & SPINDLE COMPL. (6-14/16/23) SERVICE KIT
Available in Store
Available from Supplier
Sold Out
Regular price
R 266.00 ZAR
Regular price
Sale price
R 266.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share

GEAR & SPINDLE COMPL. (6-14/16/23) SERVICE KIT
Features
- Complete drivetrain kit: Covers the Gear & Spindle “complete” component group (items 6–14, 16 & 23).
- Model-specific compatibility: Designed for the Tork Craft TCAG0115 115mm angle grinder platform.
- Restores proper engagement: Replaces worn gearbox/spindle components to bring back smooth transfer of power.
- Workshop-friendly repair solution: Ideal for repairs where replacing single sub-parts is no longer practical.
Benefits
- Bring your grinder back to life: Helps eliminate rough running, excessive play and drivetrain slippage caused by worn internals.
- Protects the rest of the tool: Fresh drivetrain components can reduce shock loads that accelerate bearing and gear wear.
- Cost-effective repair: Extends the usable life of your grinder without replacing the full machine.
Extra Information
- Compatibility: Intended for the Tork Craft TCAG0115 115mm angle grinder (900W class).
- Installation note: Gearbox repairs typically require correct grease application and careful reassembly—use an experienced technician where possible.
- Best practice: Inspect related wear items (bearings, seals, circlips, spindle lock mechanism) during the rebuild and replace if needed.
Pro Tip
- Before stripping the gearbox, take a few quick photos of the internal stack-up and spacer orientation. On reassembly, apply the correct gearbox grease (not general-purpose grease), spin by hand to confirm smooth mesh, then run the tool no-load for 30–60 seconds before putting it back to work.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAG0115-SK03 |
| Product Type | Spare Part Service Kit |
| Component Group | Gear & Spindle Complete |
| Parts Reference | Items 6–14, 16 & 23 |
| Compatible Tool Model | TCAG0115 |
| Kit UPC | 6009515877361 |
Safety
- Wear eye, ear and dust protection when operating an angle grinder.
- Disconnect power before opening the gearbox or fitting any spare parts.
- After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
- Use only rated discs for the grinder and never exceed the disc’s maximum RPM.
- Perform a no-load test run in a safe area after the repair to check for abnormal noise or vibration.