1
/
of
1
Vermont
FLANGE NUT BACK & FRONT ( 1/2) SERVICE KIT
FLANGE NUT BACK & FRONT ( 1/2) SERVICE KIT
Available in Store
Available from Supplier
Sold Out
Regular price
R 54.00 ZAR
Regular price
Sale price
R 54.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share

FLANGE NUT BACK & FRONT ( 1/2) SERVICE KIT
Features
- Genuine Tork Craft spare kit – Original back flange and front flange nut for the TCAG0115 115mm angle grinder.
- Matched back and front flanges – Designed to work together for correct disc support and clamping pressure.
- Factory fit for 115mm discs – Sized to suit the disc and spindle arrangement on the TCAG0115 grinder.
- Durable metal construction – Robust components built for high-speed grinding and cutting duty.
- Compact, easy-to-store kit – Small spare that is ideal to keep in the toolbox or workshop spares drawer.
Benefits
- Restore safe disc clamping: Fresh flanges help prevent discs from slipping or loosening during use.
- Improve disc life and performance: Correct support reduces stress and vibration at the disc hub.
- Make disc changes easier: A clean, undamaged nut is far simpler to tighten and release with a spanner.
- Extend grinder service life: Properly supported discs reduce strain on bearings, spindle and guards.
- Cost-effective repair: Replace just the worn clamping parts instead of replacing the angle grinder.
Extra Information
- These spare parts are for the Tork Craft TCAG0115 Angle Grinder 115mm 900 W 11 000 rpm 220 V – always confirm the model number on your tool.
- Ideal when the original flange nut is rounded, seized or damaged, or when the back flange face is scored and no longer supports discs evenly.
- Always inspect discs for cracks or damage before clamping them between the new back flange and front nut.
- The price shown on the product page is the unit price for one TCAG0115-SK01 service kit – PACK SIZE (where shown) indicates recommended ordering quantity and how many kits are boxed together.
- Shipping dimensions and weight can be captured separately in your product admin console and are not included in the specifications table.
Pro Tip
- When fitting the new flange nut back and front kit, take the opportunity to clean old grinding dust from the spindle and guard area. A quick wipe and a drop of light oil on the spindle shoulder make future disc changes smoother and help prevent the new nut from seizing on the thread.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAG0115-SK01 |
| Product Type | Flange Nut Back & Front Service Kit |
| Compatible Tool Model | TCAG0115 Angle Grinder 115mm 900 W 11 000 rpm 220 V |
| Included Components | Back flange and front flange nut |
| Typical Disc Size | 115 mm angle grinder discs (as per TCAG0115 specification) |
| Typical Application | Replacement of worn, damaged or lost angle grinder flange nuts |
| Pack Size | 1 × flange nut back & front kit |
Safety
- Always unplug the angle grinder from the mains (or remove the plug from the extension lead) before changing discs or working near the flange and guard.
- Use the correct factory spanner on the flange nut – do not hammer or chisel the nut loose as this can damage the flanges and spindle.
- Never overtighten the flange nut; it must be firm, not forced. Overtightening can make disc changes difficult and may damage the disc.
- Only use discs that are rated for the grinder’s speed and suitable for the material being cut or ground.
- Wear suitable eye, ear, hand and dust protection whenever you operate the angle grinder, and ensure the guard is correctly fitted and adjusted.