ANNULAR HOLE CUTTER TCT 32 X 55MM WELD SHANK 19.05MM

Features

• 55 mm diameter — ideal for larger bolt clearances, bushings and conduit penetrations.
• 35 mm cutting depth — covers common plate thicknesses and stacked material.
• 19.05 mm (3/4') Weldon shank — reliable two-flat drive for mag drills.
• TCT teeth — wear-resistant carbide tips for long life in steel and cast iron.
• Thin-wall, multi-flute body — rapid penetration and efficient chip evacuation.

Benefits

• High productivity — faster than twist drilling as only the periphery is cut.
• Cleaner holes — reduced burrs minimize post-processing.
• Lower effort — reduced feed pressure, helpful on vertical and overhead work.
• Consistent accuracy — pilot-pin guided centring and controlled slug ejection.

Extra Information

• Use in a magnetic-base drill or drill press with a suitable Weldon-shank arbor.
• A pilot pin is required for centring and slug ejection (sold separately).
• Apply cutting fluid and steady feed, especially on stainless or harder grades.

Specifications

Safety

• Wear eye, ear and gloves protection; use cutting fluid to control heat and improve chip flow.
• Ensure magnet adhesion and workpiece stability before drilling; tether the drill when working at height.
• Do not use hammer action; keep a steady feed and allow the slug to eject.
• Disconnect power before changing cutters or pilot pins.