1
/
of
1
Vermont
ANNULAR HOLE CUTTER TCT 18 X 55MM WELD SHANK 19.05MM
ANNULAR HOLE CUTTER TCT 18 X 55MM WELD SHANK 19.05MM
Available in Store
Available from Supplier
Sold Out
Regular price
R 688.00 ZAR
Regular price
Sale price
R 688.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
Tork Craft Annular Hole Cutter — TCT 18 × 55 mm, 19.05 mm (3/4') Weldon
Size: 18 mm x 55 mm [3/4' Weldon Shank]
This 18 mm TCT annular cutter is engineered for deep, precise holes up to 55 mm in structural steel and plate. Tungsten-carbide tips keep cutting sharp and fast, while the thin-wall body removes only a ring of material for lower feed force, cooler operation and a cleaner finish. Ideal for site work with mag drills where repeatable accuracy and productivity matter.
Features
- 18 mm diameter — accurate bolt and conduit hole sizing.
- 55 mm cutting depth — handles thicker plate and stacked material.
- 19.05 mm (3/4') Weldon shank — two-flat drive fits most magnetic drills.
- TCT teeth — long life in abrasive or hard materials, including stainless.
- Thin-wall, multi-flute geometry for fast penetration and efficient chip evacuation.
Benefits
- High productivity — removes less material than twist drills for quicker holes.
- Cleaner edges with reduced burrs, minimizing rework.
- Extended tool life from wear-resistant carbide tips.
- Lower effort — reduced feed pressure, especially on vertical/overhead jobs.
Extra Information
- Use in a magnetic-base drill or drill press with suitable arbor.
- Requires a pilot pin for centering and slug ejection (sold separately).
- Apply cutting fluid and steady feed, particularly on stainless or harder grades.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAC018-4 |
| Product Type | Annular hole cutter (TCT) |
| Diameter | 18 mm |
| Cutting Depth | 55 mm |
| Shank | 19.05 mm (3/4') Weldon, two-flat |
| Tip Material | Tungsten-carbide-tipped |
| Suitable Materials | Mild & structural steel, stainless (with coolant), cast iron |
| Recommended Machine | Magnetic-base drill / drill press with suitable arbor |
| Pilot Pin | Required for centering & slug ejection (size per arbor) |
| Pack Quantity | 1 |
Safety
- Wear eye, ear and gloves protection; use cutting fluid to control heat.
- Verify magnet hold before drilling; tether the drill when working at height.
- Do not use hammer action; keep a straight, steady feed and allow the slug to eject.
- Disconnect power before changing cutters or pilot pins.