1
/
of
0
Vermont
PARALLEL GUIDE (57) FOR TC20321
PARALLEL GUIDE (57) FOR TC20321
Available in Store
Available from Supplier
Sold Out
Regular price
R 74.00 ZAR
Regular price
Sale price
R 74.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
PARALLEL GUIDE (57) FOR TC20321
Features
- Genuine Tork Craft spare fence – Original parallel guide (57) matched to the TC20321 saw base.
- Direct-fit design – Slides and locks into the factory slots on the TC20321 Circular Saw Brushless 20V 165mm Blade CS165B Cordless.
- Sturdy metal construction – Rigid bar design to resist bending and keep cuts true.
- Graduated, adjustable reach – Allows you to set and repeat specific rip widths from the workpiece edge.
- Compact accessory – Easy to store in the tool case or toolbox so it is always on hand when needed.
Benefits
- Straighter cuts with less fuss: Use the guide fence against a straight edge to keep rips neat and parallel.
- Faster repeat cuts: Set once and repeat the same width cut across multiple boards or panels.
- Improved accuracy on site: Great for trimming doors, fascias and framing where a tape and freehand line are not enough.
- Restore lost accessories: Ideal when the original parallel guide has been misplaced or damaged.
- Keep your 20V system productive: Small, cost-effective spare that helps you get more from your TC20321 saw.
Extra Information
- For use with the Tork Craft TC20321 Circular Saw Brushless 20V 165mm Blade CS165B Cordless – confirm the model number on your saw.
- This part is identified as Parallel Guide (57) on the TC20321 spares breakdown and support pages.
- Pack size: the displayed price is the unit price of the parallel guide; where a PACK SIZE is indicated it is the recommended ordering quantity and the number of units per box (record this in your admin console, not in the specifications table).
- UPC / barcode: 6009515910211 – useful for stock control, labelling and scanning systems.
- Shipping dimensions and weight can be captured separately in your product admin for courier and warehouse systems.
Pro Tip
- When setting up the parallel guide for repeated cuts, mark the common widths you use (for example 50 mm, 100 mm, 150 mm) on the bar with a fine permanent marker. This makes it quicker to align the fence for your most frequent rip sizes.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TC20321-SK09 |
| Product Type | Parallel Guide Fence |
| Compatible Tool Model | TC20321 Circular Saw Brushless 20V 165mm Blade CS165B Cordless |
| Guide Position | Parallel guide (item 57) mounted to saw base |
| Typical Use | Guided parallel cuts along workpiece edges |
| Material | Metal guide bar and fence (as per original specification) |
| Pack Size | 1 × parallel guide (57) |
Safety
- Always remove the 20 V battery pack before fitting or adjusting the parallel guide on the saw.
- Ensure the guide is clamped tightly and cannot move before starting a cut.
- Keep hands clear of the blade path and use appropriate supports for long or heavy workpieces.
- Wear suitable eye, ear and dust protection whenever you operate the circular saw.
- Check the guide bar regularly for signs of bending or damage and replace it if it no longer runs straight.