1
/
of
0
Vermont
WASHER & GEAR KIT (1-5/13-21) FOR TC20321
WASHER & GEAR KIT (1-5/13-21) FOR TC20321
Available in Store
Available from Supplier
Sold Out
Regular price
R 163.00 ZAR
Regular price
Sale price
R 163.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
WASHER & GEAR KIT (1-5/13-21) FOR TC20321
Features
- Genuine Tork Craft spare kit – Factory-specified washers and gears for the TC20321 circular saw.
- Covers items 1–5/13–21/56 – Includes a matched selection of small drive and support parts from the front assembly.
- Designed for CS165B 20V saw – Correct fit for the TC20321 Circular Saw Brushless 20V 165mm Blade CS165B Cordless.
- Matched washer and gear set – Components chosen to work together for proper spacing and gear mesh.
- Service-kit packaging – All required small parts in one pack for easier maintenance planning.
Benefits
- Restore smooth running: Fresh gears and correctly sized washers help reduce noise, vibration and play.
- Maintain cutting accuracy: Good support and spacing at the drive end keep the blade running true through the cut.
- Extend tool lifespan: Replacing worn small parts protects larger components like the motor and main bearings.
- Reduce downtime: A dedicated kit saves time compared to ordering individual washers and gears.
- Keep your 20V system working: Repair a trusted TC20321 saw rather than replacing the whole tool.
Extra Information
- These spare parts are for the Tork Craft TC20321 Circular Saw Brushless 20V 165mm Blade CS165B Cordless (model TC20321).
- Ideal when you notice increased mechanical noise, excessive side play at the blade end, or visible wear on original washers and gears.
- Use the TC20321 exploded view to identify items 1–5, 13–21 and 56 and to guide disassembly and re-assembly.
- Best fitted on a clean bench with parts laid out in order so old and new components can be matched one-for-one.
- Barcode / UPC: 6009515899622 – useful for stock control, labelling and barcode scanning in your admin console.
Pro Tip
- When you install the new washer and gear kit, clean out old grease and dust from the front housing and apply fresh, suitable grease to the moving parts. A clean, correctly lubricated drive train will run quieter and extend the life of both the new kit and the saw.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TC20321-SK06 |
| Product Type | Washer & Gear Kit |
| Compatible Tool Model | TC20321 Circular Saw Brushless 20V 165mm Blade CS165B Cordless |
| Included Components | Selected washers and gears (items 1–5, 13–21, 56) |
| System Voltage (Tool) | 20 V cordless platform |
| Typical Application | Replacement of worn or damaged washers and gears in the front assembly |
| Pack Size | 1 × washer & gear kit |
Safety
- Always remove the 20 V battery pack from the circular saw before opening the housing or working near the blade and drive parts.
- Wear suitable eye protection and gloves when removing the blade and handling metal components.
- Keep small washers, gears and clips organised so none are lost or incorrectly refitted during re-assembly.
- After fitting the kit, rotate the blade by hand (with the battery removed) to check for smooth movement before powering up.
- Test the saw at no-load first and stop immediately if you notice unusual noises, vibration or heat build-up.