1
/
of
1
Vermont
BEARING & GEAR & ROTOR KIT (10/12/16-19/35/49-51/53-55/57)
BEARING & GEAR & ROTOR KIT (10/12/16-19/35/49-51/53-55/57)
Available in Store
Available from Supplier
Sold Out
Regular price
R 1,314.00 ZAR
Regular price
Sale price
R 1,314.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share

BEARING & GEAR & ROTOR KIT (10/12/16-19/35/49-51/53-55/57)
Features
- Genuine Tork Craft spare kit – Factory-specified bearing, gear and rotor components for the TC20180 RS25 saw.
- Covers multiple internal parts – Includes the main rotor, drive gear and associated bearings as per items 10/12/16–19/35/49–51/53–55/57.
- Designed for 20V brushless RS25 – Matches the original brushless drive system and housing tolerances.
- Pre-matched components – Parts are selected to work together as a set for correct meshing and support.
- Supplied as a service kit – Ideal for a complete overhaul when the original rotating group is worn or damaged.
Benefits
- Restore cutting performance: Fresh bearings, gears and rotor help the saw run smoother with more consistent power.
- Reduce vibration and noise: Replacing worn rotating parts can noticeably improve comfort and control in use.
- Extend tool life: Protects your investment in the RS25 by renewing the high-stress internal components.
- Save time on part selection: A single kit avoids the guesswork of ordering individual bearings and gears.
- Support safe operation: Properly supported and aligned moving parts reduce the risk of unexpected failure under load.
Extra Information
- Specifically intended for the Tork Craft TC20180 RS25 20V brushless reciprocating saw – check the model number on your tool before ordering.
- Refer to the official TC20180 parts list or exploded diagram to see the exact position of items 10, 12, 16–19, 35, 49–51, 53–55 and 57 inside the tool.
- Best fitted when there are signs of bearing noise, visible rotor damage, excessive play or when the saw has suffered a major overload.
- Installation is recommended for experienced users or service technicians familiar with strip-down and re-assembly of cordless power tools.
- Record approximate pack dimensions and weight separately in your admin console for shipping and handling fields.
Pro Tip
- Before you remove the old rotor and gears, mark the original orientation of components and take step-by-step photos. This makes it much easier to seat the new parts correctly, especially where shims, spacers or thrust washers are involved.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TC20180-SK02 |
| Product Type | Bearing & Gear & Rotor Service Kit |
| Compatible Tool Model | TC20180 RS25 20V Brushless Reciprocating Saw |
| Key Components | Rotor, drive gear and associated bearings (items 10/12/16–19/35/49–51/53–55/57) |
| Typical Application | Replacement of worn, noisy or damaged rotating assembly components |
| Motor Type Supported | Brushless 20V DC drive system |
| Pack Size | 1 × complete bearing, gear and rotor kit |
Safety
- Remove the 20V battery pack from the saw before opening the housing or working on any internal components.
- Work on a clean, stable surface and keep small parts, bearings and fasteners organised to avoid losing anything critical.
- After fitting the kit, turn the mechanism by hand first to check for smooth operation before refitting the battery.
- Run the saw at no-load for a short period to bed in the new components and listen for any unusual noise.
- If you are not confident performing the repair, contact an authorised Tork Craft service centre or a qualified technician.