1
/
of
0
Vermont
ANVIL & GEAR & HEAD COMPL. KIT ( 19-27) FOR TC20171
ANVIL & GEAR & HEAD COMPL. KIT ( 19-27) FOR TC20171
Available in Store
Available from Supplier
Sold Out
Regular price
R 700.00 ZAR
Regular price
Sale price
R 700.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
ANVIL & GEAR & HEAD COMPL. KIT ( 19-27) FOR TC20171
Features
- Genuine Tork Craft spare kit – Original anvil, gear and head components for the TC20171 20 V brushless impact wrench.
- Covers key front-end parts – Includes selected components from positions 19–27 in the TC20171 parts list.
- Designed for IW450 450 Nm wrench – Matches the hammer and anvil system used in the TC20171 cordless impact wrench.
- Pre-matched components – Parts supplied as a set to work together for correct fit and impact timing.
- Service-friendly pack – Ideal for a planned overhaul of a hard-worked or damaged impact mechanism.
Benefits
- Recover tightening and loosening power: Fresh anvil and gears help restore full impact energy at the fastener.
- Smooth out noise and vibration: Renewing worn hammer parts can make the wrench sound and feel more controlled.
- Extend tool lifespan: Replace high-stress front-end components instead of scrapping the complete impact wrench.
- Maintain original performance: Using the correct Tork Craft kit keeps the impact system working as designed.
- Save time on parts selection: A single genuine kit avoids guessing which individual anvil or gear parts to order.
Extra Information
- These spare parts are for the Tork Craft TC20171 Cordless Brushless Impact Wrench 450 Nm 20 V (IW450) – always confirm the model number on your tool.
- Identified on the exploded diagram as the Anvil & Gear & Head Complete Kit (19–27) for TC20171.
- Recommended when you notice rounding on the anvil, unusual noises from the head, reduced impact performance or visible internal wear.
- Best installed in conjunction with fresh grease and a general inspection of seals and bearings in the front housing.
- Barcode / UPC: 6009515897703 – useful for inventory, labelling and scanning systems.
Pro Tip
- Before disassembling the impact head, mark the original orientation of the housing and take step-by-step photos of the hammer mechanism as you open it. Lay out old parts in order and match each new component from the kit to its place – this makes reassembly much easier and helps ensure the impact system is timed correctly.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TC20171-SK03 |
| Product Type | Anvil, Gear & Head Complete Service Kit |
| Compatible Tool Model | TC20171 Cordless Brushless Impact Wrench 450 Nm 20 V (IW450) |
| Key Components | Anvil, gear and head parts (items 19–27 in TC20171 parts list) |
| System Voltage (Tool) | 20 V cordless platform |
| Typical Application | Replacement of worn or damaged anvil, gear and head components |
| Pack Size | 1 × anvil, gear & head complete kit |
Safety
- Remove the 20 V battery pack from the impact wrench before opening the head or working on any internal parts.
- Work on a clean, stable surface and keep small pins, springs and rollers organised to avoid losing critical components.
- After fitting the kit, turn the anvil and hammer mechanism by hand first to check for smooth operation before refitting covers.
- Run the wrench briefly at no-load to bed in the new parts and listen for unusual noises before using it under heavy load.
- If you are uncertain about the repair procedure, consult a qualified technician or an authorised Tork Craft service centre.