1
/
of
1
Vermont
MAGNETIC BIT HOLDER 80MM SDS PLUS 1/4' HEX
MAGNETIC BIT HOLDER 80MM SDS PLUS 1/4' HEX
Available in Store
Available from Supplier
Sold Out
Regular price
R 141.00 ZAR
Regular price
Sale price
R 141.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
MAGNETIC BIT HOLDER 80MM SDS PLUS 1/4' HEX
Features
- SDS-Plus shank — fits SDS-Plus rotary hammers.
- 1/4″ hex output — accepts standard screwdriver bits.
- Magnetic retention — helps hold bits and screws during starts.
- 80 mm length — practical reach without excess flex.
Benefits
- Fast swapping: Convert your SDS-Plus tool to a driver in seconds.
- Fewer drops: Magnet assists with bit and screw control.
- Clean access: Extra reach improves visibility around fittings.
Extra Information
- Use on a rotary hammer in drill-only (hammer OFF) when driving screws.
- Pair with quality 1/4″ hex bits matched to the fastener (PH, PZ, TX, etc.).
- Not intended for percussion drilling while a bit is fitted.
Pro Tip
- Engage the tool’s clutch if available. Start slow to seat the bit, then increase speed once fully aligned with the screw.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | T SD2071180 |
| Product Type | Magnetic bit holder / adapter |
| Shank (Input) | SDS-Plus |
| Drive (Output) | 1/4″ hex |
| Overall Length | 80 mm |
| Magnetic | Yes |
| Barcode (EAN/UPC) | 6009515840136 |
| Suitable Tools | SDS-Plus rotary hammer (drill-only mode) |
Safety
- Set hammer action OFF before driving screws with this adapter.
- Wear eye protection and keep hands clear of rotating parts.
- Do not exceed recommended torque for the bit and fastener.