1
/
of
1
Vermont
MAGNETIC BIT HOLDER 150MM ONE TOUCH CARDED 1/4' HEX
MAGNETIC BIT HOLDER 150MM ONE TOUCH CARDED 1/4' HEX
Available in Store
Available from Supplier
Sold Out
Regular price
R 172.00 ZAR
Regular price
Sale price
R 172.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
Tork Craft Magnetic Bit Holder — 150 mm, One-Touch Quick-Release, 1/4' Hex (Model T-BH21010150)
Extend your reach and speed up bit changes. The Tork Craft T-BH21010150 is a 150 mm magnetic bit holder with a one-touch quick-release sleeve and 1/4' hex shank. It firmly grips standard 1/4' hex bits while giving extra clearance for fastener access in recessed or awkward spaces.
Features
- 150 mm extension — extra reach for deep or obstructed fasteners.
- One-touch quick-release sleeve — rapid bit changes with positive lock-in.
- Magnetic retention — holds 1/4' hex bits securely and stabilises screws.
- 1/4' hex shank — fits standard drill/drivers and bit holders.
- Carded retail packaging for easy identification and storage.
Benefits
- Faster workflow: Swap bits in seconds without fiddling with the chuck.
- Better access: Slim 150 mm form helps reach confined or recessed fasteners.
- Fewer drops: Magnet assists with screw pickup and starts.
Extra Information
- Compatible with standard 1/4' hex insert bits (25–50 mm and longer).
- For best results, seat the bit fully until the locking collar clicks; pull the sleeve to release.
- Use with a quality bit set matched to the fastener type to minimise cam-out.
Pro Tip
- Mark this holder “150 mm QR” with a paint pen so it’s easy to grab the long quick-release version in your kit.
- When starting screws overhead, touch the screw to the magnetised bit first for a steadier start.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | T-BH21010150 |
| Product Type | Magnetic Bit Holder – Quick-Release |
| Length | 150 mm |
| Shank | 1/4' hex (6.35 mm) |
| Bit Interface | 1/4' hex insert bits |
| Retention | Magnetic + one-touch locking sleeve |
| Packaging | Carded |
| Typical Use | Extended-reach screwdriving; quick bit changes |
Safety
- Disconnect the driver before fitting/removing bits.
- Ensure the bit locks in place; tug to confirm before use.
- Avoid excessive side-load that can bend or snap bits.
- Wear eye protection; small fasteners can eject under load.