Vermont
NOZZLE/NEEDLE SET 0.8MM FOR LM3000M
NOZZLE/NEEDLE SET 0.8MM FOR LM3000M
Couldn't load pickup availability
Share
AirCraft Nozzle & Needle Set 0.8mm For LM3000M (SG-LM3000M-2)
At a Glance: 0.8mm nozzle and needle replacement set for finer control and crisp atomisation on the LM3000M spray gun
If you’re chasing a cleaner, tighter finish and better control at lower flow rates, nozzle size matters. The AirCraft SG-LM3000M-2 Nozzle & Needle Set (0.8mm) is a matched replacement set for the LM3000M spray gun, designed to restore smooth atomisation, consistent flow, and reliable sealing. A 0.8mm setup is ideal for finer finishing and controlled application where you want less material per pass and more precision—perfect when worn parts have started causing spitting, pulsing, poor fan shape, or frustrating leaks.
Replacing the needle and nozzle together helps bring the spray gun back into proper alignment and sealing. It’s the smart fix when deep cleaning doesn’t solve the issue, or when the needle tip has been damaged and the gun just won’t behave.
Features
- Matched Nozzle & Needle Set Replaces both wear components for correct fit and proper sealing.
- 0.8mm Size Supports finer atomisation and controlled flow for detail-oriented finishing.
- LM3000M Compatibility Designed for the AirCraft LM3000M spray gun.
- Restores Spray Pattern Helps correct spitting, pulsing, uneven fan patterns, and poor control caused by wear.
Benefits
- Finer Finish Quality: Improves atomisation for smoother results and better surface control.
- More Precise Application: Lower flow capability helps reduce overspray and makes detail work easier.
- Reduced Leakage Risk: Matched parts improve sealing compared to replacing components individually.
- Cost-Effective Repair: Extends the life of your spray gun without replacing the entire unit.
Extra Information
- Always strain paint before spraying—tiny particles can block a 0.8mm nozzle faster than larger sizes.
- Use the correct reducer/thinner and follow coating manufacturer guidelines for best atomisation.
- Clean the gun immediately after use; dried paint around the needle/nozzle is a common cause of poor spray patterns.
- After installation, do a test pattern on cardboard to confirm fan shape and flow before spraying the final surface.
Pro Tip
- For a super-smooth finish, start with lighter passes and build coats gradually—0.8mm setups reward patience with cleaner results and less risk of runs.
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG-LM3000M-2 |
| Product Type | Nozzle & Needle Set |
| Nozzle Size | 0.8mm |
| Compatible Model | LM3000M Spray Gun |
| Typical Use | Spray gun maintenance / nozzle and needle replacement |
Safety
- Wear eye protection and a respirator suitable for paint fumes, especially with solvent-based coatings.
- Work in a well-ventilated area and keep ignition sources away from paint and thinners.
- Shut off the air supply and depressurise the spray gun before disassembly or fitting parts.
- Handle the needle carefully—its tip is precision-ground and can be damaged by knocks or bending.
- Wear chemical-resistant gloves when cleaning with thinners and wash hands after use.