Vermont
PU HOSE FITTING TEE 6MM X 6MM X 1/2'M
PU HOSE FITTING TEE 6MM X 6MM X 1/2'M
Couldn't load pickup availability
Share
AirCraft PU Hose Fitting Tee 6mm x 6mm x 1/2" BSP (SG APD06-04)
At a Glance; 6 mm tube tee with 1/2" BSP male thread for robust air line branching
The AirCraft SG APD06-04 PU Hose Fitting Tee 6mm x 6mm x 1/2" BSP is a heavy-duty hybrid connector for pneumatic systems where you need a tube branch and a larger threaded connection point in one neat fitting. With two 6 mm push-in tube ports and a 1/2" BSP male thread, it’s ideal for larger manifolds, valves, distribution blocks and workshop air accessories—keeping your compressed-air layout tidy, reliable and easy to service.
This fitting helps you avoid stacking adaptors by combining tube-to-tube branching with a threaded port in one compact body. Fewer joins means fewer potential leak points, while the push-in ports make tubing changes quick during maintenance.
Features
- Dual 6 mm push-in ports Quick-connect branching for 6 mm pneumatic tubing.
- 1/2" BSP male thread Screws into compatible ports on larger air components and manifolds.
- Compact tee body Keeps routing neat in panels, benches and machine frames.
- Service-friendly design Simplifies upgrades, re-routing and routine maintenance.
Benefits
- Cleaner air plumbing: Branch your 6 mm line and connect to a larger threaded port in one fitting.
- More robust threaded interface: 1/2" thread suits higher-capacity manifolds and distribution points.
- Reduced leak risk: Fewer adaptors and unnecessary joins means fewer places for air loss.
Extra Information
- For use with 6 mm outside diameter pneumatic tubing (commonly PU/nylon).
- The threaded end is 1/2" BSP male—commonly used on larger manifolds, valves and air accessories.
- For best sealing, cut tubing square and clean, and seal threaded joints as required for your application.
Pro Tip
- When tightening the 1/2" threaded end, support the fitting body to avoid twisting the tube lines, then leak-test after pressurising to confirm a proper seal.
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG APD06-04 |
| Product Type | PU Hose Fitting Tee (Tube Tee with BSP Thread) |
| Tube Size | 6 mm x 6 mm (OD) |
| Thread Size | 1/2" BSP Male |
| Connection Type | Push-In Tube Ports + Threaded Port |
| Suitable Tubing | PU / Nylon Pneumatic Tube |
| Application | Compressed Air Line Branching & Equipment Connection |
Safety
- Wear eye protection when working with pressurised air lines.
- Depressurise the system before installing or removing pneumatic fittings.
- Route tubing to avoid kinks, abrasion and snag points that can cause leaks or failure.
- Do not exceed the rated limits of your compressor, regulator, hoses and fittings.