Vermont
PU HOSE FITTING TEE 4MM X 4MM X 1/8'M
PU HOSE FITTING TEE 4MM X 4MM X 1/8'M
Couldn't load pickup availability
Share
AirCraft PU Hose Fitting Tee 4mm x 4mm x 1/8" BSP (SG APD04-01)
At a Glance; 4 mm tube tee with 1/8" BSP male thread for clean, compact air line branching
The AirCraft SG APD04-01 PU Hose Fitting Tee 4mm x 4mm x 1/8" BSP is a neat solution for building compact pneumatic layouts where you need both tubing and a threaded connection point. With two 4 mm push-in tube ports and a 1/8" BSP male thread, it makes it easy to branch a line and screw directly into compatible regulators, manifolds, valves or gauge blocks—keeping your air system tidy, efficient and easy to service.
Instead of stacking multiple adaptors, this fitting combines tube-to-tube branching with a threaded port in one compact body. Fewer joins means a cleaner installation and fewer potential leak points in your compressed-air setup.
Features
- Dual 4 mm push-in ports Quick-connect branching for 4 mm pneumatic tubing.
- 1/8" BSP male thread Screws into compatible ports on air accessories and control components.
- Compact tee body Ideal for tight spaces on benches, panels and small pneumatic assemblies.
- Service-friendly design Makes re-routing and maintenance simpler with less clutter.
Benefits
- Cleaner air plumbing: Branch your 4 mm line and connect to a threaded port in one fitting.
- Faster installs: Push-in tube connections reduce assembly time and downtime.
- Reduced leak risk: Fewer adaptors and unnecessary joins mean fewer places for air loss.
Extra Information
- For use with 4 mm outside diameter pneumatic tubing (commonly PU/nylon).
- The threaded end is 1/8" BSP male, commonly used on compact pneumatic components.
- For best sealing, ensure tubing is cut square and clean, and seal threaded joints as required for your application.
Pro Tip
- Support the fitting body while tightening the threaded end to avoid twisting the tube lines, then leak-test with soapy water after pressurising.
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG APD04-01 |
| Product Type | PU Hose Fitting Tee (Tube Tee with BSP Thread) |
| Tube Size | 4 mm x 4 mm (OD) |
| Thread Size | 1/8" BSP Male |
| Connection Type | Push-In Tube Ports + Threaded Port |
| Suitable Tubing | PU / Nylon Pneumatic Tube |
| Application | Compressed Air Line Branching & Equipment Connection |
Safety
- Wear eye protection when working with pressurised air lines.
- Depressurise the system before installing or removing pneumatic fittings.
- Route tubing to avoid kinks, abrasion and snag points that can cause leaks or failure.
- Do not exceed the rated limits of your compressor, regulator, hoses and fittings.