Vermont
RED. INSERT T-JOINT PU 12MM - 10MM
RED. INSERT T-JOINT PU 12MM - 10MM
Couldn't load pickup availability
Share
AirCraft Red Insert T-Joint PU 12mm - 10mm (SG APBJ12-10)
At a Glance; Reducing push-in tee: 12 mm main line to 10 mm branch connections
The AirCraft SG APBJ12-10 Red Insert T-Joint PU 12mm - 10mm is made for clean, high-flow pneumatic branching when your setup needs a strong main feed and slightly smaller distribution lines. It allows a 12 mm tube run through the tee while providing 10 mm branch connections—ideal for workshop air reticulation, machine circuits, manifolds, and installations where fast push-in fitment keeps downtime low and routing stays neat.
This reducing tee combines two jobs in one compact fitting: it splits your line and steps the tube size down at the same time. Fewer joiners means fewer potential leak points, while the push-in collet design makes tubing changes quick and simple.
Features
- Reducing tee configuration Connects a 12 mm tube run with 10 mm branch outlets.
- Push-to-connect collet design Quick installation with secure tube retention.
- Colour-coded red body Easy identification in multi-line pneumatic installations.
- Compact, workshop-ready build Neat routing in panels, benches, and machine frames.
Benefits
- Cleaner air plumbing: Reduce from a 12 mm feed to 10 mm branches without stacking extra fittings.
- Lower risk of leaks: Fewer connections means fewer places for air loss to creep in.
- Faster maintenance: Push-in connections make line changes and servicing far quicker.
Extra Information
- Suitable for pneumatic tubing such as PU and nylon (use correct outside diameter per port).
- For best sealing, cut tubing square and clean, then insert fully until it bottoms out.
- Ideal where a high-flow 12 mm main line feeds 10 mm distribution to tools, circuits, or manifolds.
Pro Tip
- After pressurising, check all joints with soapy water and route tubing away from sharp edges to prevent abrasion over time.
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG APBJ12-10 |
| Product Type | Red Insert T-Joint (Reducing Push-In Tee) |
| Tube Size (Main Line) | 12 mm (OD) |
| Tube Size (Branch Line) | 10 mm (OD) |
| Connection Type | Push-to-Connect (Collet Release) |
| Suitable Tubing | PU / Nylon Pneumatic Tube |
| Application | Compressed Air Line Branching & Size Reduction |
Safety
- Wear eye protection when working with pressurised air lines and fittings.
- Depressurise the system before installing, removing, or adjusting pneumatic connectors.
- Route tubing to avoid kinks, abrasion, and snag points that can cause leaks or failure.
- Do not exceed the rated limits of your compressor, regulator, hoses, and fittings.