1
/
of
1
Vermont
CAPATANCE & CABL COMPL SET (33/41-44) FOR POL06-2G
CAPATANCE & CABL COMPL SET (33/41-44) FOR POL06-2G
Available in Store
Available from Supplier
Sold Out
Regular price
R 189.00 ZAR
Regular price
Sale price
R 189.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share

CAPATANCE & CABL COMPL SET (33/41-44) FOR POL06-2G
Features
- Genuine Tork Craft service kit Contains the correct capacitance and cable components for the POL06-2G polisher.
- Rated for 1500 W operation Cable and capacitor are matched to the load and speed range of the POL06-2G.
- Integrated strain relief Helps protect the cord entry from flexing and mechanical damage.
- Direct-fit connectors Designed to match the original terminations and routing inside the housing.
Benefits
- Restore Electrical Safety: Replaces aged or damaged cables and components that could pose a shock or fire risk.
- Improved Starting And Running: Fresh capacitance helps the motor start reliably and run more smoothly.
- Reduced Downtime: Solves common issues like intermittent power, flickering, or tripping due to faulty leads or capacitors.
- Cost-Effective Refurbishment: Extends the life of your POL06-2G without the expense of a complete new machine.
Extra Information
- Intended as the capacitance and cable complete set for positions 33 and 41–44 on the Tork Craft POL06-2G 1500 W 180 mm polisher spare parts diagram.
- Ideal when the tool shows signs of cracked insulation, visible cable damage, poor starting or electrical faults traced to the lead or capacitor.
- Packed weight approximately 0.32 kg, with typical pack dimensions of 213 mm x 98 mm x 100 mm (for logistics and storage planning).
Pro Tip
- Before removing the old cable and capacitor assembly, take clear photos of the wiring layout and terminal positions. Use a suitable cable clamp and ensure the strain relief is correctly seated so the new lead cannot pull on internal connections during use.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | POL06-2G-SK13 |
| Product Type | Polisher service kit – capacitance and cable complete set |
| Compatibility | Tork Craft POL06-2G 1500 W 180 mm polisher |
| Positions | Components 33, 41–44 in the POL06-2G spare parts diagram |
| Barcode (UPC) | 6009515898083 |
Safety
- Always disconnect the polisher from the power supply before working on the cable, capacitor or any internal wiring.
- Only suitably competent persons should carry out electrical repairs; if in doubt, use an authorised service centre.
- After fitting the new set, check that the cable clamp and strain relief are fully tightened and that no wires are pinched.
- Before returning the tool to service, perform a function test and visual inspection, and where required have the tool electrically tested.