1
/
of
1
Vermont
POLISHER SERVICE KIT REPL CORD & SLEEVE (44/45) FOR MY3025-1
POLISHER SERVICE KIT REPL CORD & SLEEVE (44/45) FOR MY3025-1
Available in Store
Available from Supplier
Sold Out
Regular price
R 189.00 ZAR
Regular price
Sale price
R 189.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
POLISHER SERVICE KIT REPL CORD & SLEEVE (44/45) FOR MY3025-1
Features
- Genuine Tork Craft replacement kit designed for the MY3025-1 tube belt sander/polisher.
- Replacement mains cord and sleeve corresponding to components 44 and 45 on the exploded diagram.
- Correct cord rating and length to suit the motor power and reach of the tube belt sander/polisher.
- Purpose-made strain relief sleeve supports the cord where it enters the rear handle housing.
Benefits
- Improved electrical safety: replaces damaged or suspect leads to reduce the risk of electric shock and nuisance tripping.
- More reliable operation: a sound cord and sleeve help prevent intermittent power loss during sanding and polishing.
- Professional repair: using genuine parts keeps the tool close to its original factory specification.
Extra Information
- Only suitable for the Tork Craft MY3025-1 tube belt sander/polisher – always confirm the model number on the rating plate.
- Ideal when the original cord shows cuts, exposed conductors, hard kinks or a loose entry point at the handle.
- Fit together with a visual check of the switch, speed control and strain relief areas while the handle is open.
Pro Tip
- When installing the new cord, route the cable so there is a small service loop inside the handle instead of pulling it dead tight. This bit of slack works as a shock absorber whenever the lead is tugged or flexed, helping your new MY3025-1-SK17 cord and sleeve last much longer in tough workshop conditions.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | MY3025-1-SK17 |
| Product Type | Polisher Service Kit – Replacement Cord And Sleeve |
| Compatible Tool | Tork Craft MY3025-1 Tube Belt Sander/Polisher |
| Components Included | Replacement Cord And Strain Relief Sleeve (Items 44, 45) |
| Cord Function | Mains Power Supply To The Tool |
| Sleeve Function | Strain Relief And Protection At Handle Entry |
| Spare Category | Tube Belt Sander Polisher Spares |
Safety
- Always disconnect the tube belt sander/polisher from the mains and allow it to cool before opening the handle or working on the cord.
- Ensure all live, neutral and earth connections are correctly terminated and insulated according to local regulations.
- Check that the strain relief sleeve and cord clamp are secured firmly so the cable cannot pull out under tension.
- If you are not qualified to work on electrical equipment, have the MY3025-1-SK17 kit fitted by a competent technician.