1
/
of
1
Vermont
POLISHER SERVICE KIT ARMATURE (26) FOR MY3025-1
POLISHER SERVICE KIT ARMATURE (26) FOR MY3025-1
Available in Store
Available from Supplier
Sold Out
Regular price
R 563.00 ZAR
Regular price
Sale price
R 563.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
POLISHER SERVICE KIT ARMATURE (26) FOR MY3025-1
Features
- Genuine Tork Craft armature built for the MY3025-1 tube belt sander/polisher.
- Correct shaft and bearing seats to suit the original bearings, housings and gear layout.
- Factory-balanced rotor to minimise vibration and improve smooth running at polishing speeds.
- Quality copper windings and commutator for reliable electrical performance when installed correctly.
Benefits
- Restore lost power: a fresh armature can bring a weak, noisy or non-starting MY3025-1 back to life.
- Smoother operation: correct fit and balance help reduce noise, vibration and heat during use.
- Extend tool life: replacing a failed armature is usually far more economical than buying a new tube belt sander/polisher.
Extra Information
- Only suitable for the Tork Craft MY3025-1 tube belt sander/polisher – always confirm the model number on the rating plate.
- Best fitted as part of a full motor service together with an inspection of bearings, brushes and the gear box.
- Use the exploded parts diagram to identify the existing armature as component 26 before starting disassembly.
- Pack information: Model MY3025-1-SK06, approximate pack weight 0.44 kg, UPC 6009515852306.
Pro Tip
- When fitting a new armature, always install new carbon brushes and check the bearings at the same time. Bedding fresh brushes onto a clean commutator, supported by good bearings, helps the repaired motor run cooler and greatly improves the lifespan of your MY3025-1-SK06 service kit.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | MY3025-1-SK06 |
| Product Type | Polisher Service Kit – Armature |
| Compatible Tool | Tork Craft MY3025-1 Tube Belt Sander/Polisher |
| Component Function | Motor Armature (Item 26) |
| Application | Restoring Motor Power And Smooth Running |
| Spare Category | Tube Belt Sander/Polisher Spares |
| UPC | 6009515852306 |
Safety
- Always disconnect the MY3025-1 from the mains and allow it to cool before opening the motor housing.
- Take care with internal wiring and insulation – route cables as originally fitted and avoid pinching them on reassembly.
- Ensure all covers, screws and safety components are correctly refitted before testing the repaired tool.
- If you are not confident working on electric tools, have the MY3025-1-SK06 armature fitted by a qualified technician.