1
/
of
1
Vermont
POLISHER SERVICE KIT CARB. BRUSH PAIR (38) FOR MY3016-2
POLISHER SERVICE KIT CARB. BRUSH PAIR (38) FOR MY3016-2
Available in Store
Available from Supplier
Sold Out
Regular price
R 47.00 ZAR
Regular price
Sale price
R 47.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
POLISHER SERVICE KIT CARB. BRUSH PAIR (38) FOR MY3016-2
Features
- Genuine Tork Craft replacement carbon brush pair for the MY3016-2 stainless pipe polisher.
- Correct brush size and profile to suit the original brush holders and commutator.
- Pre-terminated leads for secure electrical connection and straightforward installation.
- Supplied as a pair so both sides of the motor can be serviced at the same time.
Benefits
- Restore motor performance: fresh brushes help bring back lost power and smoother operation.
- Reduce sparking and heat: good brush contact lowers arcing, protecting the armature and stator.
- Low-cost maintenance: replacing brushes is one of the simplest ways to extend the life of your MY3016-2.
Extra Information
- Only suitable for the Tork Craft MY3016-2 stainless pipe polisher – always confirm the model number on the rating plate.
- It is recommended to replace both brushes at the same time, even if only one appears more worn.
- After fitting new brushes, allow the machine to run at no-load for a short period so they can bed in smoothly on the commutator.
Pro Tip
- If your MY3016-2 starts to lose power, run hot or spark more than usual at the air vents, check the brush length before assuming the motor has failed. Very often, fitting a new MY3016-2-SK10 carbon brush pair is all that is needed to get the polisher running like new again.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | MY3016-2-SK10 |
| Product Type | Polisher Service Kit – Carbon Brush Pair |
| Compatible Tool | Tork Craft MY3016-2 Stainless Pipe Polisher |
| Component Function | Motor Carbon Brushes (Item 38) |
| Pack Contents | 1 Pair Of Carbon Brushes |
| Spare Category | Stainless Pipe Polisher Spares |
| Typical Use | Routine Replacement Of Worn Brushes During Service |
Safety
- Always disconnect the pipe polisher from the mains and allow it to cool before opening the brush covers.
- Ensure brushes slide freely in the holders and that springs are seated correctly before reassembling.
- Refit all brush caps and covers securely before operating the tool.
- If you are not confident working on electric tools, have the MY3016-2-SK10 brush kit fitted by a qualified technician.