1
/
of
1
Vermont
POLISHER SERVICE KIT ARMATURE (26) FOR MY3016-2
POLISHER SERVICE KIT ARMATURE (26) FOR MY3016-2
Available in Store
Available from Supplier
Sold Out
Regular price
R 563.00 ZAR
Regular price
Sale price
R 563.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
POLISHER SERVICE KIT ARMATURE (26) FOR MY3016-2
Features
- Genuine Tork Craft armature built for the MY3016-2 stainless pipe polisher.
- Correct shaft and bearing seats to suit the original bearings, housings and gear layout.
- Factory-balanced rotor to minimise vibration and improve running smoothness.
- Quality windings and commutator for reliable electrical performance when installed correctly.
Benefits
- Restore lost power: a fresh armature can bring a weak, noisy or non-starting polisher back into service.
- Smoother operation: correct fit and balance help reduce noise, vibration and heat during use.
- Extend tool life: replacing a failed armature is often far more economical than buying a new MY3016-2.
Extra Information
- Only suitable for the Tork Craft MY3016-2 stainless pipe polisher – always confirm the model number on the rating plate.
- Best replaced as part of a full motor service, together with inspection of bearings, brushes and speed control components.
- Identify the armature as component 26 on the exploded parts diagram before starting disassembly.
Pro Tip
- When fitting a new armature, always install new carbon brushes and check the bearings at the same time. Bedding fresh brushes onto a new commutator, supported by good bearings, helps the repaired motor run cooler and greatly improves the lifespan of the service kit.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | MY3016-2-SK06 |
| Product Type | Polisher Service Kit – Armature |
| Compatible Tool | Tork Craft MY3016-2 Stainless Pipe Polisher |
| Component Function | Motor Armature (Item 26) |
| Spare Category | Stainless Pipe Polisher Spares |
| Typical Use | Replacing Burnt Or Worn Motor Armatures |
| Installation | Fit In Accordance With Tool Manual Or By Qualified Technician |
Safety
- Always disconnect the pipe polisher from the mains and allow it to cool before opening the motor housing.
- Take care with internal wiring and insulation – route cables as originally fitted and avoid pinching them on reassembly.
- Ensure all covers, screws and safety components are correctly refitted before testing the repaired machine.
- If you are not confident working on electric tools, have the MY3016-2-SK06 armature fitted by a qualified technician.