1
/
of
1
Vermont
POLISHER SERVICE KIT SWITCH & TRIGGER (42) FOR MY3015-2
POLISHER SERVICE KIT SWITCH & TRIGGER (42) FOR MY3015-2
Available in Store
Available from Supplier
Sold Out
Regular price
R 94.00 ZAR
Regular price
Sale price
R 94.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
POLISHER SERVICE KIT SWITCH & TRIGGER (42) FOR MY3015-2
Features
- Genuine Tork Craft spare kit switch and trigger assembly for the MY3015-2 polisher.
- Matched to component 42 on the exploded diagram for easy identification and correct fit.
- Integrated trigger design provides comfortable, fingertip on/off control while working.
- Electrical rating matched to the tool for safe, reliable operation at the machine’s full load.
Benefits
- Restore safe control: replaces worn or unreliable switches so the machine starts and stops as intended.
- Improved comfort: a fresh trigger with a positive feel makes long polishing sessions easier to manage.
- Cost-effective repair: changing the switch and trigger can save a good tool from being scrapped unnecessarily.
Extra Information
- Only suitable for the Tork Craft MY3015-2 polisher – always confirm the model number on the rating plate.
- Recommended when the machine fails to switch on consistently, cuts out unexpectedly or the trigger action feels stiff or loose.
- Follow the wiring layout and routing shown in the manual or original assembly when fitting the new switch and trigger.
Pro Tip
- Before removing the old switch, take clear photos of the wiring from several angles. Use these as a reference when transferring wires to the new unit so each lead goes back on the correct terminal and nothing is pinched when the housing is closed.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | MY3015-2-SK13 |
| Product Type | Polisher Service Kit – Switch And Trigger |
| Compatible Tool | Tork Craft MY3015-2 Polisher / Burnishing Machine |
| Component Function | On/Off Switch And Trigger Assembly (Item 42) |
| Spare Category | Power Tool Spares |
| Typical Use | Replacing Faulty Or Worn Switch And Trigger Controls |
| Installation | Fit And Wire As Per Tool Manual Or By Qualified Technician |
Safety
- Disconnect the polisher from the mains and allow it to cool before opening the housing or working on the switch.
- Double-check all wiring connections and insulation before reassembling the tool.
- Ensure the trigger moves freely and the switch operates cleanly before returning the machine to service.
- If you are not confident working on electrical components, have the MY3015-2-SK13 kit fitted by a qualified technician.