1
/
of
1
Vermont
POLISHER SERVICE KIT CARB. BRUSH PAIR (36) FOR MY3015-2
POLISHER SERVICE KIT CARB. BRUSH PAIR (36) FOR MY3015-2
Available in Store
Available from Supplier
Sold Out
Regular price
R 87.00 ZAR
Regular price
Sale price
R 87.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
POLISHER SERVICE KIT CARB. BRUSH PAIR (36) FOR MY3015-2
Features
- Genuine Tork Craft spare part carbon brush pair for the MY3015-2 polisher / burnishing machine.
- Correct brush size and shape to suit the original brush holders and commutator.
- Paired set of two brushes so both sides of the armature can be replaced together for balanced wear.
- Flexible leads and proper terminations for secure electrical connection and easy installation.
Benefits
- Restore motor performance: new brushes help bring back lost power and smoother running.
- Reduce sparking and heat: good brush contact lowers arcing, which can protect the armature and stator.
- Low-cost maintenance: replacing brushes is one of the simplest, most economical ways to extend tool life.
Extra Information
- Only suitable for the Tork Craft MY3015-2 polisher – always confirm the model number on the rating plate.
- It is recommended to replace both brushes at the same time, even if only one appears worn.
- After fitting new brushes, allow the machine to run at no-load for a short period to bed the brushes in on the commutator.
Pro Tip
- If your MY3015-2 starts to lose power, run hot or spark more than usual at the vents, check the brush length before assuming the motor has failed. Often, fitting a new MY3015-2-SK10 carbon brush pair is all that is needed to get the tool running like new again.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | MY3015-2-SK10 |
| Product Type | Polisher Service Kit – Carbon Brush Pair |
| Compatible Tool | Tork Craft MY3015-2 Polisher / Burnishing Machine |
| Component Function | Motor Carbon Brushes (Item 36) |
| Spare Category | Power Tool Spares |
| Pack Contents | 1 Pair Of Carbon Brushes |
| Typical Use | Replacing Worn Motor Brushes During Service |
Safety
- Always disconnect the machine from the mains and allow it to cool before opening the brush covers.
- Ensure brushes slide freely in the holders and that springs are seated correctly before reassembling.
- Refit all brush caps and covers securely before operating the tool.
- If you are not confident working on electric tools, have the MY3015-2-SK10 brush kit fitted by a qualified technician.