1
/
of
1
Vermont
CUTTING DISC METAL 115 X 1.0X 22.23 10PC LTD EDITION TIN
CUTTING DISC METAL 115 X 1.0X 22.23 10PC LTD EDITION TIN
Available in Store
Available from Supplier
Sold Out
Regular price
R 91.00 ZAR
Regular price
Sale price
R 91.00 ZAR
Taxes included.
Quantity
Couldn't load pickup availability
Share
Tork Craft Cutting Discs — Metal, 115 × 1.0 × 22.2 mm (10-Piece Limited Edition Tin)
A special edition tin set containing ten of Tork Craft’s high-performance steel cutting discs. Each disc is 1.0 mm thick with a 22.2 mm bore, designed for precision, clean cutting of mild steel, tube and profile work.
Features
- Thin kerf (1.0 mm) — for quick, low-resistance cutting.
- 115 mm diameter — versatile size for standard angle grinders.
- 22.2 mm (7/8″) bore — fits most grinder flanges.
- Metal cutting grade for consistent use on steel.
- Limited edition tin packaging — collectible and protective.
Benefits
- Faster cut rate: thin disc reduces drag and heating.
- Cleaner edges: minimal grind cleanup required.
- Presentation-ready pack: tin keeps discs protected and organized.
Extra Information
- Use discs only on ferrous metals — avoid use on stainless, aluminum, masonry or stone.
- Let the disc cut at its own rate — excessive force may cause breakage.
- Store discs flat and dry; avoid impacts and exposure to moisture or oils.
Pro Tip
- Use a light scoring pass first to “guide” the disc, then follow with a deeper cut—this helps maintain straight cuts with the thin 1.0 mm wheel.
- Change the disc when you notice a slowdown or edge chipping — fresh wheels save time and reduce burn marks.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Model / Cat No. | COMBO-111 |
| Product Type | Cutting disc (angle grinder) |
| Application | Metal / Steel cutting |
| Diameter | 115 mm |
| Thickness | 1.0 mm |
| Bore | 22.2 mm (7/8″) |
| Pack Quantity | 10 discs (limited edition tin) |
| Typical Uses | Sheet, bar, tube, angle, steel profile cutting |
Safety
- Wear eye, face, hearing and hand protection and always use the guard.
- Mount only on grinders rated for the wheel’s RPM; do not side-grind with cutting discs.
- Allow the disc to reach full speed before contacting material; avoid twist or pinch.
- Inspect discs for cracks, chips, or warping before use; discard damaged wheels.