COMPLEX ARMATURE & BEARING KIT (28/32-36) FOR TCCS0185

Features

• Motor rebuild service kit: Replaces the armature and bearing component group used in the TCCS0185 assembly.
• Parts reference match: Covers part 28 and parts 32–36 as per the service diagram references.
• Improves smoothness and alignment: Helps correct rough running caused by worn bearings and rotor-related wear.
• Model-specific compatibility: Intended for use with the Tork Craft TCCS0185 cut-off saw.

Benefits

• Restore consistent performance: Helps bring back stable power under load for cleaner, more confident cut-offs.
• Reduced vibration and noise: Fresh bearings and correct rotor alignment can reduce harsh mechanical sound and shake.
• Extend tool life: A proper motor rebuild helps protect brushes, housings and electrical components from knock-on damage.

Extra Information

• Compatibility: Intended for the Tork Craft TCCS0185 cut-off saw series.
• Recommended: Inspect/replace carbon brushes when replacing an armature, and check the stator for heat damage.
• Clean out carbon dust and metal debris during servicing — contamination causes tracking, heat and premature wear.
• Ensure wiring is routed and secured away from rotating parts and sharp edges before closing the housing.

Specifications

Safety

• Wear eye protection and a dust mask when working with carbon dust and internal debris.
• Disconnect power before opening the tool or fitting any spare parts.
• Motor repairs should be done by a competent technician — incorrect assembly can cause electric shock or mechanical failure.
• After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
• Perform a brief no-load test in a safe area and stop immediately if you smell burning, hear rubbing or feel excessive vibration.